Views:
A SNMP Trap Message is the notification message sent to the SNMP server when events that require administrative attention occur.

Procedure

  1. Go to Administration → System Settings → SNMP.
  2. Under Trap Messages, select Send SNMP trap messages.
  3. Specify the trap message settings.
    Option
    Description
    Manager server address
    Specify the manager server address.
    SNMP version
    Select the SNMP version:
    • SNMPv1/SNMPv2c
    • SNMPv3
      If you use SNMPv3, configure the SNMP server as follows:
      • Context Name: "" (default context)
      • Context Engine ID: <Auto>
      • (Optional) MD5 Authentication protocol: HMAC-MD5
      • (Optional) AES Privacy protocol: AES128
    Community name
    Specify a community name.
    Security model
    Select the security model:
    • No authentication or privacy
    • Authenticated
    • Authenticated with privacy
    User name
    Specify the user name.
    Password
    Specify the password.
    Privacy passphrase
    Specify the privacy passphrase.
    Note
    Note
    Before configuring the appliance, set up the SNMP server first using the same SNMP version, community name, security model, user name, password, and privacy passphrase.
  4. Click Save.
  5. (Optional) Click Download MIB to download the Management Information Database (MIB) files.
    • Users can open the MIB files to view all network objects that can be monitored and managed using the SNMP protocol, or import them into management consoles that support this protocol.
    • For a list of Deep Discovery Analyzer supported SNMP object identifiers (OID), see SNMP Object Identifiers.